Well, what´s to say about our DIVINE SL? It is simply the lightest production dropper post in the world with a total length of 445mm and 125mm infinite drop. Tailored to the needs of XC and marathon racers, the DIVINE SL is the youngest offspring of our dropper family. Based on the award-winning and patented REVIVE technology, we´ve modified the internals to work perfectly with the shorter travel. - Infinite adjust, 125mm travel - Total overall length: 445mm - But can be easily cut to as short as 375mm - Titanium saddle bolts - Tapered lower tube - Compatible with oval and carbon saddle rails - Sub-zero temperature functionality - Fully user serviceable - 450g Sold as seatpost only—Remote/Trigger's are sold separately.

- Perforated leather handlebar tape - Genuine perforated leather - Kit includes: 2 strips of light, perforated leather bar tape, 2 rubber bar end plugs and 2 adhesive cloth strips - Self Adhesive: Yes - Tape Length: 215mm

Clean and Simple is always best. Leverless design for added security and clearance for when situations get tight. These super tough axles tighten up with a 6mm Allen key. They feature "a get out of jail" 6mm Allen key on the drive side of the axle if you manage to round the non-drive side. - Constructed from 7075 Aluminium and made to the manufacturer's exact specifications. Fits Yeti Bikes: - 160E - Arc - SB120 - SB140 MY23+ - SB160 Note: Original part for SB120, SB140 MY23+, SB160 is 172mm length, the 174mm axle is still compatible.

When you've got to finish your bike off right. The Burgtec Stem Spacers are the perfect finishing kit.

- 11 speed wide range cassette - 7075 Aluminum largest sprocket - Alloy spiders, spacers and lockring - Fits Shimano/SRAM freehub - 465g (11-46); 401g (11-42); 389g (11-40)

Derailleur Hanger Plate with Nut and Bolt.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss 240s Shim Ring

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

- Non-SIS 5mm alloy ferrules - Sold individually - Color: Silver

Replacement small parts for Hope disc brake Hope disc brake calipers.

- Brass barrel, 2.2mm cable pass-through, screwdriver slot on both ends

Internally fitting service parts for Hayes hydraulic disc brake master cylinders. - All HFX-MAG compatible master cylinder internals are designed for the current aluminum piston/2mm push-rod platform (2003 and newer).

- Aheadset preload adjusting bolt

Shim spacers can be placed between bearing and compression cover in IS headsets to fine tune the fitment.

Service parts for Fox suspension.

Hope Brake Lever Parts

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

KS Dropper Post Service Parts

Steel 1mm spacer fits Shimano cassette bodies - Great for 10 sp cass on 8/9 sp hubs - Also for many other fit applications

- Replacement cable anchor bolt for brakes - Includes nut and washer

Looking to get a little extra distance so that your derailleur clears your 40 or 42 tooth cog? Look no further. - M4 x 24mm screw for that extra little push

Origin-8's 1 1/8-inch Headset Spacers are made of lightweight and durable aluminum and come in 2mm, 5mm or 10mm thicknesses and lots of cool colors to add style to your ride. You get a bag of 10 spacers.

RockShox 35mm Seal Kit

Sunlite's Cable End Button replaces the worn out piece that goes between your brake cable and the brake lever body. Replacing it along with cables and housing helps add new life to your brakes and shines u the bike, too!

Replacement piston and seals for Hope disc brake calipers.

Replacement air valve assemblies for Fox suspension.

KMC 3/16" Master Link Chain Links - For 3/16" chain, extra wide - Extra-wide, for non-derailleur bikes: BMX, cruisers, etc - Perfectly fits on KMC 415H & 415H-NP chains

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Lightweight aluminum alloy - Non-Keyed - Height: 20mm - 10 to a bag

Saddle clamp heads and lowers for KS Dropper posts.

Saddle clamp heads and lowers for KS Dropper posts.

Sold as each. 29mm I.D. 1mm Thick Spacers for Sram Dub Spindles. OK to stack them.

- Model: Replacement bolt - Compatibility: Allen, M5x16

- Plastic guide with ziptie for securing housing/Tubing nearly anywhere on the bike

HFX-Mag/-9, El Camino, Stroker Caliper-Hose Connection Seal

- MC bodies are bare (no guts, reservoir, lever, etc.) - Stroker Series bodies come with bar clamp and bolts

- Sunlite Cottered Pins

- M8 Top Plate Bolt

- Rubber - Color: Black

- Steel cable noodle with alloy end caps - Includes plastic liner

FSA Mega Exo Small Parts.

FSA Mega Exo Small Parts.

Bleed fittings specifically designed for Hayes hydraulic disc brakes.

Race Face Crank Arm Fixing Bolts - For EXI Cranks - Bolt Puller Cap Washer for self-extracting bolt

This is a replacement Brake Hose Cover for the Lever End of Shimano BH90-SBM, BH90-SB levers. - Covers brake hose fitting at the brake lever

- Replacement retaining clip for the Surly Tuggnut/Snuggnut

- Crank dust cap - Works with most three-piece crank models

- Chrome - Sold individually

- Routes cables underneath the bottom bracket - Will not rust or corrode

- 8x1mm Allen head

Hope Disc Brake Hose Small Parts · This washer fits on both sides of the banjo bolt and seals the hose fitting into the master cylinder

Brass compression olive for Hope hydraulic disc brakes.

Parts for the service of the seal and restore the smooth cycling of KS dropper posts.

Use to create your desired chain length in single-speed applications. Only one half link is needed. - Non-reusable - Width: 9.4 mm - Drivetrain Speeds: 1 - Color: Black - Chain Compatibility: Shimano , SRAM , Campagnolo , Connex , KMC

The Gyro G3 upper top plate is designed for use with the G3 detangler.

- For Race Face 30mm Cinch System cranks only - Allows switching crank arms between bikes, such as a FatBike and an XC MTB - Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

KS Dropper Post Service Parts

Saddle clamp heads and lowers for KS Dropper posts.

- Crown Race - Size: 27.0mm

- Model: Derailleur Bolt & Nut - Compatibility: Mounts rear bracket to frame