Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Chainrings

$21.00 - $74.00
Replacement PowerGlide ring for 11 speed crankset. - Compatible with Asymmetrical Yaw front derailleurs - Bolt Circle Diameter (BCD): 110 BCD - Material: Aluminum
$24.00
SRAM's road chainrings are stamped from 7075 aluminum for low weight and excellent strength. The teeth are ramped for precision shifting, too.
$165.00
Shimano Ultegra 6800 11-Speed Inner Chainrings - Material: Aluminum - Ring Position/Type: Inner
$74.00 - $85.00
SRAM X-SYNC 2 1x chainrings provide a high level of performance and durability. The aggressive teeth design provides better chain retention for a smoother, more efficient pedal feel. With a focus on long wear-life, the design reduces friction and the accumulation of mud, grit, and grime. - The sharp and narrow tooth profile, as well as rounded chamfer edges, help manage a deflected chain - X-SYNC 2 chainring design increases chain retention, improves durability, and reduces friction and noise - Designed to be used with Eagle chain - 104mm BCD
$73.66 - $142.84
Gates Carbon Drive CDX Front belt drive rings are crafted with 6061 aluminum and work well for high-mileage touring or rugged off-roading. - Constructed of 6061 aluminum - 11mm pitch - CDX CenterTrack belts, cogs and rings do not interchange with any part of a CDC/CDX MudPort system
$170.00
Updated to a new stiffer LT2 5mm big ring, this allowed our engineers to increase the amount of shift features and the type of shift features we could forge into the ring. It also allowed us to use our new fast-engaging forged shift pins to improve shift speed. Holding it together with even better support is our beefed-up LT2 forged X-Spider. LevaTime II is our newest generation of shifting tech. Updated to a new stiffer LT2 5mm big ring, this allowed our engineers to increase the amount of shift features and the type of shift features we could forge into the ring. It also allowed us to use our new fast-engaging forged shift pins to improve shift speed. Holding it together with even better support is our beefed-up LT2 forged X-Spider. All of this adds up to the fastest and most snappy feeling shift we’ve ever produced. We believe so much in our new LevaTime II shifting that we’ve made this aftermarket upgrade kit available to our prior customers. So anyone with an older 3-Bolt Direct Mount Praxis road crank can upgrade immediately. Even if your 3-Bolt Direct Mount Praxis crank is a couple of years old, you can simply order this new full kit and update your crank to LevaTime II shifting. - Designed for Praxis 3-bolt DM road cranks with 10/11/12sp drivetrains - Cold forged 7075-T6 alloy rings mounted to 3-bolt DM spider - LevaTime II: Praxis unique timing and shifting technology. Several shift pins are placed strategically at points on the ring to provide a perfectly timed lift - At this time not compatible with SRAM AXS chain - Unauthorized online sales are prohibited by the manufacturer
$59.99 - $91.00
Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.
$128.00
Intense study of chain and chainring wear patterns led to the radical tooth profile that lasts longer, runs quieter and further improves chain retention. Oval ring shape for riders that want to adjust the power profile of their pedal stroke. - The only oval rings with X-Sync 2 tooth design - Direct Mount Type: Direct Mount SRAM - Drivetrain Speeds: 10, 11, 12 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring - Round or Oval: Oval - Chainline/Hub Compatibility: 141/148 Boost Hubs
$24.59 - $25.39
Origin-8's Alloy Blade Chainrings are CNC-machined out of tough, light and durable 6061-T6 aluminum and are compatible with 8- and 9-speed drivetrain components. They have an attractive and corrosion-resistant silver anodized finish.
$22.00
The EX1 drive train was designed specifically for the demands of electric-assist mountain bikes: a wide gear range with bigger jumps between gears and sturdy components to handle higher torque loads. Liberal use of features found on SRAM’s high end MTB parts provide high value, quiet operation and ease of service. - X-Sync (wide-narrow) tooth profiles for great chain management - Compatible with Bosch mid-drive E-bike systems - Material: Steel - Size/BCD: Direct mount - Recommended Group: EX1
$59.49 - $76.49
Narrow/Wide tooth design for chain retention on 1x systems - 10 or 11 speed compatible - Mud clearing channels - CNC 7075 Swiss Alloy
$59.49 - $84.99
Narrow/Wide tooth design for chain retention on 1x systems - Oval shape for increased power and efficiency - 10 or 11 speed compatible - Mud clearing channels - CNC 7075 Swiss Alloy - 4 bolt
$76.49 - $84.99
Narrow/Wide tooth design for chain retention on 1x systems - Oval shape for increased power and efficiency - 10 or 11 speed compatible - Mud clearing channels - CNC 7075 Swiss Alloy
$27.69 - $44.19
Origin-8's Alloy Blade Chainrings are CNC-machined out of tough, light and durable 6061-T6 aluminum and are compatible with 8- and 9-speed drivetrain components. They have an attractive and corrosion-resistant silver anodized finish.
$34.49 - $50.99
Origin-8's Alloy Blade Chainrings are CNC-machined out of tough, light and durable 6061-T6 aluminum and are compatible with 8- and 9-speed drivetrain components. They have an attractive and corrosion-resistant silver anodized finish.
$32.00 - $44.00
This direct mount chainring coincides perfectly with the Afterburner Modular Crank. The megatooth design allows you to put all of your power through without worrying about dropping your chain. - Material: Steel - Precision CNC-machined AL7075/T6 - Long tooth profile enhances chain retention - Thick Thin tooth design for maximum chain engagement - SH12: Compatible with Shimano 12s chain
$23.39 - $25.99
Origin-8's BMX/SS/Fixie Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with BMX, fixie and track drivetrain components. They have an attractive and corrosion-resistant anodized finish.
$34.99 - $39.99
Origin-8's Alloy Non-Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They feature an attractive and corrosion-resistant black anodized finish.
$24.99
The Box Four Wide/Narrow chainring completes that package for the 1x8 system. It is the first 8-speed specific chainring designed to optimize chain retention when using 8-speed chains. The tooth profile and thicknesses are tailored to match the inside geometry of the unique Box Four chain. FEATURES - Our 8 is Enough Chainring - Forged & CNC Steel - ED Black Protection - Wide / Narrow 8s Specific - 104 BCD Compatible
$151.00
- X-Range gearing technology gives you more range and a smoother gear progression, so you're always in the right gear - New tooth profiles for improved wear - More durable finish - 94mm BCD
$69.95 - $94.95
Proven cross-compatibility applied to an ultra-lightweight, durable AL-7075-T6 chainring. Highly CNC'd technical finish. Available to match Helix cassette colors, SRAM™ compatible 3-bolt design. A technology first. Combine with the chain, derailleur/shifter of choice without a change in chain retention quality. Build a dream rig with more freedom and spec creatively. Available in bold colors to match the popular e*thirteen Helix R Cassettes, Plus 35 Stems, and Quick Fill Plasma Valves. - Save weight, keep your drivetrain options open, and use the chain you want - 3-Bolt Direct Mount design for use with SRAM™ 3-bolt direct mount compatible cranks - Cut from billet AL-7075 for the highest strength and wear resistance - SRAM™ and Shimano™ 11 and 12 Speed Chain Compatible - Extensive CNC machining for lightweight and looks that kill - Available in 5 bold Ano colors and 4 sizes 28/30/32/34t - Match and personalize the way you want? - E*thirteen QuickConnect Direct Mount rings include 1mm spacers which allows them to be run on legacy cranks (TRS/LG1/XCX) as well as Helix and Helix R cranks - 3-bolt direct mount chainrings fit SRAM and other similar interface cranks - Tooth profile
$59.99
A total redesign of Odyssey's popular MDS sprocket. With a built-in full guard, this sprocket lives up to its name, helping to protect your chain from anything you can throw at it. Sprocket thickness increases towards the guard area for greater strength. Compatible with all chain widths. - 7075 Aluminum
$38.21 - $99.25
- For use with Shimano XTR M960 crankset - CNC-machined 7075-T6 aluminum with modified shift gates and special profiles to allow flawless shifting - Middle and outer chainrings have strategically-placed stainless steel pins to further enhance shifting - 5mm thick middle ring, 4mm thick outer ring - Anodized black with laser-etched graphics
$128.00
Designed for use with SRAM's XX SL Eagle power meter, these Thread Mount replacement rings are purpose made for use with the XX SL proprietary spider design. This chainring mount system allows reduced weight without compromising reliability. - Proprietary Thread-Mount design specifically for use with XX SL Power Meter spiders - Light weight and incredibly durable aluminum chainring - Compatible with SRAM T-Type chains - SRAM Threaded chainring tool required for installation (Sold separately - TL0190)
$51.95
absoluteBLACK Premium Round 110 BCD Road Chainrings utilize absoluteBLACK's top-tier design features. They are designed for cranks like Shimano Dura-Ace FC7950, Ultegra FC6750, Shimano 105 5750, and others with a 5-bolt fitting. Optimized with smooth shifting in mind, premium chainrings have a unique shifting ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Rings provide exceptional stiffness due to thicker, 5mm construction - Provides excellent weight-to-strength ratio - If only switching the inner chainring, use all original crank bolts
$99.95
absoluteBLACK Premium Round 110 BCD Road Chainrings utilize absoluteBLACK's top-tier design features. They are designed for new and old Shimano 4-arm cranks, such as Dura-Ace 9100, 9000, Ultegra 8000, 6800 & 105 R7000, and more. Optimized with smooth shifting in mind, premium chainrings have a 6-point ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Chainring BCD: 110 Shimano Asymmetric - Rings provide exceptional stiffness due to thicker, 5mm construction - Provides excellent weight-to-strength ratio - 10, 11, and 12-speed compatible
$129.95
absoluteBLACK Premium Oval 110 BCD Road Chainrings utilize absoluteBLACK's top-tier design features to greatly improve traction and speed. They are designed for Shimano Dura-Ace 9100, Ultegra 8000, and 105 R7000 4-bolt cranks only. Optimized with smooth shifting in mind, premium chainrings have a 6-point ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing - 10, 11, and 12-speed compatible - Outer rings feature 6-point shifting ramps that work in conjunction with the tooth recesses to stabilize the chain while shifting and allow for easy and quick gear changes - Outer chainrings also features 12 down-shifting points - Use absoluteBLACK long chainring bolts to install outer ring
$24.99 - $49.99
Dimension Multi Speed Chainrings. - CNC-machined AL-7075 - Has ramps and pins to aid in shifting (not on 74mm BCD inner chainring) - Same BCD as Surly Long Haul Trucker, Cross-Check, and Troll complete bikes (74mm & 110mm)
$81.95 - $86.95
"More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you’ll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body’s natural biomechanics. Here’s how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what’s known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you’re climbing. We’ve also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch chainrings feature our patented Drop-Stop® tooth profiles for the best wear life, chain retention and mud clearance. We have optimized tooth profiles for SRAM T-Type Transmission, Shimano Hyperglide+, and all 12, 11, 10, and 9-speed chains. Compatibility - Any Race Face Cinch™ system crankset (including Next SL, Sixc, Turbine, Aeffect) - Riders running SRAM Transmission w/ Race Face Cinch cranksets with a Boost 136/137mm spindle use a Cinch direct mount 0mm offset chainring. - Riders using a Cinch crankset with a Super Boost 151mm spindle use a Cinch direct mount 3mm offset chainring. - Standard (142mm rear hub spacing) 6mm offset, Boost (148mm hub spacing) 3mm offset, and Boost for T-Type Transmission 55mm chainline 0mm offset are available. - Use a 3mm offset chainring for Super Boost applications running standard drivetrains or Transmission. - Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) --- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!) - Chainline 49mm (standard), 52mm (Boost), 55mm (T-Type Boost) - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck."
$69.95 - $79.95
"More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval, but without the funky, uneven pedal stroke. Ride one once and you’ll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body’s natural biomechanics. Here’s how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what’s known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power, while behaving like a 32T chainring when you’re climbing. We’ve also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. These chainrings are for Race Face Cinch cranks such as Turbine, Next SL, Sixc & Aeffect. The Wolf Tooth Cinch chainrings feature our patented Drop-Stop® tooth profiles for the best wear life, chain retention and mud clearance. We have optimized tooth profiles for SRAM T-Type Transmission, Shimano Hyperglide+, and all 12, 11, 10, and 9-speed chains. Compatibility - Any Race Face Cinch™ system crankset (including Next SL, Sixc, Turbine, Aeffect) - Riders running SRAM Transmission w/ Race Face Cinch cranksets with a Boost 136/137mm spindle use a Cinch direct mount 0mm offset chainring. - Riders using a Cinch crankset with a Super Boost 151mm spindle use a Cinch direct mount 3mm offset chainring. - Standard (142mm rear hub spacing) 6mm offset, Boost (148mm hub spacing) 3mm offset, and Boost for T-Type Transmission 55mm chainline 0mm offset are available. - Use a 3mm offset chainring for Super Boost applications running standard drivetrains or Transmission. - Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud shedding ability. - For 1x9, 1x10, 1x11 and 1x12 drivetrains (including SRAM Eagle) --- If using a 9-speed drivetrain use a 10-speed chain (shifts and works well on a 9-speed drivetrain and fits the ring tighter for better chain retention). - Maximum diameter is that of a chainring 2t bigger than the size you order (so be sure there is adequate chainstay clearance!) - Chainline 49mm (standard), 52mm (Boost), 55mm (T-Type Boost) - Available in multiple tooth profiles for optimal performance based on your chain type. Use Drop-Stop ST for use with Shimano 12-speed Hyperglide+ and 12spd KMC chains. Use Drop-Stop A for all 9, 10, and 11spd chains or 12spd SRAM Eagle, KMC, Connex or Wippermann chains. Drop-Stop B is optimized for SRAM 12 spd Transmission (T-type) and Road Flattop chains but is compatible with all chains that work with Drop-Stop A. Recommendations - If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur! Without these precautions, you may experience chaindrops and/or chainsuck."
$10.00 - $17.00
Shimano Sora 9-Speed replacement chainrings gets your drivetrain operating smoothly again.
$13.00 - $158.00
Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.
$24.00 - $91.00
Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains. - 104mm BCD - Material: Aluminum
$92.00
- Megatooth thick thin tooth design for Shimano 12sp mountain chain engagement - Direct mount FSA modular crank model-specific rings
$90.00
- CNC machined from single blocks of 7075 aluminum - Compatible with SRAM Boost GXP and BB30 3-bolt DM cranks for+3mm offset - Available in Q-ring oval version
$10.00
- Chainrings for SLX FC-M675 double cranks - Please refer to compatibility: 38T chainrings are available for 24T or 26T inner chainring and are not cross-compatible.
$18.00
-Anodized aluminum for minimum weight
$79.89
Origin8's Thruster 110mm BCD 5-bolt chainring sets are great for road, 'cross, and gravel applications. Shifting ramps and stainless steel pins deliver smooth shifting, and these rings are 10 or 11 speed compatible. - Stamped AL2014-T6 alloy construction - BCD: 110mm 5-Bolt - Type: 2x - Chain Compatibility: 10/11s - Tooth Type: Standard
$99.95
absoluteBLACK Silver Series Oval 110 BCD Chainrings feature many of the same benefits as absoluteBLACK's Premium line, but with less material machined out on the outer side, allowing for easier maintenance and cleaning. They are designed for Shimano 4-bolt cranks, such as Dura-Ace 9000, Ultegra 6800, 105 5800, and others. Optimized with smooth shifting in mind, these chainrings have a 6-point ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Designed for your winter/training bike where weight is not an issue but ease of cleaning is - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing
$12.00 - $30.00
Claris R2000 series 8-speed chainrings are a reliable option for long touring, town cruising, and daily commuting. - Direct replacement for R2000/R2030 cranks - Hyperglide technology ensures smooth and reliable shifting - Compatible with 4-arm crank design
$21.19
Origin-8's Alloy Blade Chainrings are CNC-machined out of tough, light and durable 6061-T6 aluminum and are compatible with 8- and 9-speed drivetrain components. They have an attractive and corrosion-resistant silver anodized finish.
$18.00
- Anodized aluminum for minimum weight
$60.00 - $72.00
- Wide tooth profiling prevents chain drop without a chainguide - Compatible with 9/10/11 speed chains, allowing a 1x setup on most drivetrains - Constructed in Canada from 7075 aluminum
$56.00
Original equipment on SRAM and Truvativ cranks, they also work well with other drive trains. - 7000 series aluminum provides strength and durability
$128.00
It’s undeniable that some riders’ pedaling styles benefit from oval chainrings, so SRAM has engineered the new X-SYNC 2 Oval chainrings to give them the advantage they want. They are the only oval option available with SRAM's genuine X-SYNC 2 teeth profile, so they are the only oval chainrings on the market that are 100-percent optimized for Eagle. - Direct Mount Type: Direct Mount SRAM - Drivetrain Speeds: 10, 11, 12 - Material: Aluminum - Ring Position/Type: Chain Retaining Single Ring - Chainline/Hub Compatibility: 135/142 MTB Hubs, 150/157 DH Hubs, 170/177 Hubs
$92.95
absoluteBLACK Premium Sub-Compact 110 BCD Oval Chainrings are designed to improve your climbing and cadence. They are compatible with the majority of 110 BCD 5-bolt cranks. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Sub-Compact chainrings only work in the 48/32 size combination - Mounting bolts are included with the 32T ring - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing - Not compatible with SRAM Yaw front derailleurs - 10, 11, and 12-speed compatible - 8% ovality is ideal for climbing
$54.49 - $59.99
Origin-8's Alloy Ramped Chainrings are CNC-machined in the USA out of tough, light and durable 6061-T6 aluminum and are compatible with 8-, 9- and 10-speed drivetrain components. They have ramped teeth and are pinned for superior shifting and durability, and feature an attractive and corrosion-resistant black anodized finish.
$84.95 - $89.95
Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our patent pending Drop-Stop® technology. These beautifully machined 110 BCD asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX / road / gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. - Fits 110 BCD Asymmetric 4-bolt Shimano cranks - Drop-Stop technology. On Wolf Tooth's patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. - Alternating wide/narrow tooth pattern prevents chain derailment Compatibility: - Fits 110 BCD asymmetric 4-bolt cranks - All sizes compatible with Dura Ace 9000, Ultegra 6800, 105 5800, RS510, Tiagra 4700 or 4703, Sora R3000 or R3030, and Claris R2000 or R2030 cranks. - 38-50t are compatible with 105 R7000, Ultegra R8000, and Dura-Ace R9100. The 36t chainring is NOT compatible with these cranks. - NOT compatible with Dura-Ace R9200, Ultegra R8100, and 105 R7100 Cranks - Size 42t and larger will work with the Dura Ace 9100 power meter - Mounts in the big ring position of the cranks but is offset inward for perfect chainline. - The stock 2x bolts will not work. You will need our 6mm bolts which are optimized for single ring mounting. - If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention - Chainline 47.5mm - Use Drop-Stop B for all SRAM Eagle, SRAM Road and Transmission (T-Type) Flattop chains, 9, 10, and 11spd chains or 12spd KMC, Connex, Wippermann, Campagnolo. DROP-STOP B Compatible 9, 10, 11, and 12spd SRAM Eagle, 12spd SRAM Transmission (T-type) Flattop, 12spd Campy, 12spd KMC Not compatible with 12spd Shimano HG+ chains
$88.95
This absoluteBLACK 1x Oval Direct Mount Chainring for CINCH is designed exclusively for use with Shimano Hyperglide+ chains (CN-M9100, 8100, and 7100). Oval chainrings greatly improve traction and climbing abilities. They are crafted from CNC machined 7075 aluminum for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%. - This chainring will only work with Shimano Hyperglide+ CN-M9100, 8100, & 7100 chains due to the different thickness of the teeth - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - 3mm offset is designed for bikes with Boost spacing and fat bikes (when reversed) - Provides excellent weight-to-strength ratio
$42.49 - $50.99
- 64/104mm BCD 4-bolt chainring sets for MTB, Boost, and Fat applications - Shifting ramps and stainless steel pins for smooth shifting - 10 or 11 speed compatible - Stamped AL2014-T6 alloy construction - BCD: 64/104mm 4-Bolt - Type: 2x - Tooth Type: Standard
$74.99
absoluteBLACK Oval 94 BCD 1x Chainrings greatly improve traction and climbing abilities. They are designed for SRAM X01, X1, GX, NX, and GX Eagle cranks. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.2-14.4%, with timing of 110.5-116.3° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - Provides excellent weight-to-strength ratio - For 48mm chainline - Rings have built-in threads for ease of mounting and reduction in weight - Chainring bolts are included
$54.99
- CNC-machined 6061-T6 aluminum with rounded tooth profile to reduce chain wear
$46.00
Shimano Sora 9-Speed replacement chainrings gets your drivetrain operating smoothly again.
$51.95
absoluteBLACK Silver Series Oval 110 BCD Chainrings feature many of the same benefits as absoluteBLACK's Premium line, but with less material machined out on the outer side, allowing for easier maintenance and cleaning. They are designed for Shimano 4-bolt cranks, such as Dura-Ace 9000, Ultegra 6800, 105 5800, and others. Optimized with smooth shifting in mind, these chainrings have a 6-point ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Designed for your winter/training bike where weight is not an issue but ease of cleaning is - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing
$29.00
Shimano XTR M9000 11-Speed Chainrings - Chainring BCD: 64 Shimano Asymmetric - Drivetrain Speeds: 11 - Material: Aluminum - Ring Position/Type: Inner
$61.95 - $189.99
absoluteBLACK Premium Oval 110 BCD Road Chainrings utilize absoluteBLACK's top-tier design features to greatly improve traction and speed. They are designed for Shimano Dura-Ace 9100, Ultegra 8000, & 105 R7000 4-bolt cranks only. Optimized with smooth shifting in mind, premium chainrings have a 6-point ramp and recess design. Chainrings are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Chainring design reduces the possibility of leg cramps and allows you to maintain a better cadence while climbing - 10, 11, and 12-speed compatible - Ramps are designed specifically for a 50/34 combination - If only switching the inner chainring to oval, use all original crank bolts - 6.5% ovality is ideal for road climbing
$99.95
absoluteBLACK Oval 110 BCD 1x Chainrings for gravel greatly improve traction for gravel or road 1x setups. They are designed for all Shimano 4-bolt cranks such as Dura-Ace 9100, 9000, Ultegra 8000, 6800, and more. The specially designed narrow-wide tooth profile keeps the chain snug, allowing you to leave your chain keeper in the garage. They are crafted from CNC machined 7075 aluminum and feature an anodized finish for exceptional durability. Ovality has been optimized for each chainring size, ranging from 10.5-11.4%, with timing of 112-113° after TDC (top dead center). - Oval shape reduces stress on knees, helps to keep your legs fresh, and does not feel any different while riding - Teeth have been 3D-machined for ultimate mud shedding and quieter operation - The unique, patent-pending narrow-wide tooth profile keeps the chain in place - Provides excellent weight-to-strength ratio - 12-Speed Eagle compatible - Chainring has 1.5mm offset toward frame to provide the perfect chainline - Chainring bolts are included
$29.99
The SUMO III is CNC machined from thick 6061 Aluminum with a simple and super strong design. - Bore: 15/16" / 24mm - Thickness: 6.0mm - Adapters for 22mm & 19mm spindles included - Weight: 2.3-ounce
$100.00
Designed with ROTOR's oval chainring shape to take full advantage of your strongest pedaling point, the Direct Mount Oval chainring helps you get the most out of every trail ride and enduro race with less overall effort and fatigue required. This oval chainring is direct-mount compatible with Rotor R-Hawk and R-Raptor cranksets designed specifically for 1x drivetrains on all-mountain and enduro bikes. It's fully compatible with all modern groupsets, ranging from 9-speed through 12-speed drivetrains, giving you the perfect excuse to ditch your old 2x drivetrain for the efficiency gains and weight savings of a 1x set-up. Wide-narrow teeth mean you won't have to worry about the chain falling off, especially if you choose to ride without a chain guide. This oval chainring is CNC machined from 7075-T6 aluminum for a simplified design that saves approximately 40 grams compared to the ring, spider, and bolt combo you'd need with a more traditional chainring and crankset. This design also improves overall rigidity for powerful pedaling, as well as giving it slight advantages in the aero department. - 7075-T6 aluminum for optimal strength-to-weight - Oval chainring shape reduces the "dead spot" in pedal stroke - Direct-mount with ROTOR Kapic, INpower, 2INpower, RHawk, RRaptor cranksets - Semi-aero design improves rigidity and aerodynamics - Wide-narrow teeth for chain retention with 1x set-ups - Optimum Chainring Positioning personalizes to your pedaling - Compatible with 9, 10, 11, 12, and 13-speed groupsets (including SRAM AXS Eagle). - Weight: 51g per 32t
$76.95 - $81.95
More power, better traction, less shifting. Wolf Tooth oval chainrings use our proprietary PowerTrac design that has all the benefits of oval but without the funky, uneven pedal stroke. Ride one once and you’ll wonder why you waited so long to try oval. Think of an oval chainring as two chainrings in one. A major benefit of the oval is how the shape of the chainring alters your gearing in two important phases of your pedal stroke by harnessing your body’s natural biomechanics. Here’s how it works. The area of the chainring with the larger diameter engages with the chain at the optimal point on the downstroke, which is what’s known as the Power Zone. If you were to look at a clock, the Power Zone would be between 1-5 and 7-11. Conversely, the Recovery Zone – back to the clock face, between 11-1 and 5-7 – is the weakest part of the pedal stroke, when the oval maximizes your efficiency. A 34T oval chainring behaves like a 36T chainring when you want power while behaving like a 32T chainring when you’re climbing. We’ve also engineered our oval chainrings to provide smoother, more efficient pedal rotation. This equates to better traction because of steadier torque on the rear wheel. With a Wolf Tooth oval chainring, you can harness more of your strength in the Power Zone, while having easier pedaling in the Recovery Zone. The direct mount chainrings for SRAM cranksets replace your existing spider and chainring with one clean-looking, lightweight, and stiff piece of machined billet. They are available in 3 different offsets: 6mm offset for 49mm chainline, 3mm offset for 52mm chainline, and 0mm offset for 55mm chainline and SRAM Transmission optimization. They are available in various tooth profiles to suit your drivetrain, including Drop-Stop B, which is optimized for SRAM T-Type Transmission and compatible with many other chains. Crankset and chainring compatibility questions? Check out our helpful guide here.
Page 1 of 6 Next page