The Wolf Tooth Bottle Shift is designed to offset a bottle to a more optimal location and make it possible to also mount a pump on frames with large downtubes. It is most commonly used on dual suspension frames where the water bottle is difficult to access because of interference with the top tube or shock. By shifting the bottle slightly off center and tilting it outward, clearance is greatly improved. - Slots and extra tapped holes in the mount provide 18mm of bottle position adjustment - Designed to be easily flipped to provide either left or right hand bottle access - Centerline of the bottle moves 18mm with the combined 10 degree tilt and 9 mm offset - Offset of pump bracket mounting holes allows mounting mini pumps on most mountain bikes

B-RAD Everywhere Base 2

B-RAD Everywhere Base 3

Be rad with the B-RAD System, the ultimate Bottle Relocation and Accessory Device. Mount your bottles away from inconvenient rear shocks, add storage room for tools or tubes below a bottle cage, and provide space for a second bottle on sufficiently long downtubes—all with one patented design. Our handy 1-1 template helps you determine which Base measurements match your frame and our selection of B-RAD Replacement Parts ensures you’ll never go without a particular feature or strap. Stay hydrated and prepared on every ride by carrying your essentials right where you need them! Half Bottle Adapter lets you offset the bottle cage location to make your bottle more accessible, and to fit additional accessories like a pump, tool, tube, etc. - Easy to access bottles and out of the way of legs - Easy to install using existing cage mounts on a bike (B-RAD Base component required; sold separately) - Use the DogBone base for curved downtube frames Great for trail, enduro, bike packing, XC, and town/commuting applications. The B-RAD Mini Strap and Accessory Mount were designed especially for the Half Bottle Adapter so it could be mounted to the side of the bottle. But you can customize it to fit your needs. Works great with modern trail bikes from companies like Pivot, Intense, and Santa Cruz or others with difficult bottle access. Tech Specs: - Material: 6061-T6 aluminum brackets - Weight: 18g - Maximum load: 1700g - Tools Needed: T25 Torx - Torque: 3-4 Nm - Made in the USA

The Wolf Tooth Morse Cage has its name because of the dots and dashes on the mounting plate that provide for up to 32mm of vertical placement adjustment. This allows the rider to change bottle cage position based on restrictions of frame size, frame bags, or mount placement. - Hand-bent hollow tubing - Fits any bike frame that has two standard bottle cage mounts with 64mm spacing - Easily bent back in to shape if damaged - Made by hand in Minnesota

- The Wolf Tooth Morse Cage is a lightweight and low profile way to reposition bottle cages. - Named for its dot-dash-dot-dash mounting pattern, the Morse Cage base plate offers four positions across 32mm of vertical adjustment, fully capturing one mounting bolt in every position to prevent movement. - Can be bent back into shape if damaged, and is available in both titanium and stainless steel

- Whisky Carbon Water Bottle Cage - Cage Material: Carbon - Mount Type: Bolt-On - Weight: 28 grams (C3), 25 grams (C2), 30 grams (C1)

The No. 9 Side Entry Cage by Whisky Parts Co. melds convenience, form, function, and light weight. It's full-carbon design securely grips your bottle, and side entry cages allow access to your bottle on small frames or when using frame bags.

Fancy up that bottle cage with a fresh new water bottle from Whisky Parts Co. This insulated 23-oz. bottle with a MoFlo cap makes instant refreshment possible! - Insulated for temperature optimization - Purist technology shields the inside of the bottle from any bad taste, mold, or staining - Squeezable materials allow for unmatched flexibility and comfort

With this new Trimax grip cage, you won’t need to worry about losing your bottle out on the road. You can take on any terrain and still find your bottle intact. It is also compatible with the Trimax Rear Hydration System. - Water bottle cage with greater stiffness to prevent unintentional bottle release - Reinforced ribs and sturdy bottom shelf for positive engagement and release - Universal bottle fitment - Fiber-reinforced Nylon body - 20mm of adjustability for the ideal mounting position

Our lovely VO bottle cage mount allows you to affix water bottle cages on your handlebars. They are made of extruded aluminum and are intended for city bikes, so they fit bars up to 25.4mm. The mount comes with the two bolts needed to attach the cage to the mount (Some riders will want to use them on the 26mm "sleeved" road bars. In that case you'll need to file just a touch off the top edge of the "hinge" section so it opens a liitle wider. Of course, it's no problem to use them on "bulged" road bars.)

The Moderniste Bottle Cage continues to be a favorite for retro and contemporary bikes. The elegant, minimalist design securely holds a plastic or stainless steel water bottle. This beautifully polished cage is made from lightweight, tubular stainless steel, so it is strong and exceptionally lightweight (43g). The cage can also be squeezed inward or expanded to get the perfect fit for your preferred water bottle.

These cages are based on an old French design from the '40s or early '50s. In our estimation, they are the best looking bottle cages of all time. The Retro is a regular one-handed cage; you insert the bottle just like in any other cage, but it holds the bottle very securely due to the spring-like shape. You can spread the cage for an oversized bottle, or squeeze the cage inward for a better fit with (for instance) a metal water bottle. Retro cages are made by hand from a single length of 3mm stainless steel rod and then electro-polished. If you examine it closely from all angles you'll see that it is, indeed, hand made. There are two versions of our cage. This is "Type II," with a tab on the back to hold smaller and regular plastic bottles securely. "Type I" has no tab, which is the traditional design and is the better option if you're using taller metal water bottles such as the 27oz Klean Kanteen.

FLOW is our high-end Performance mountain bike protector backpack with an integrated and removable Lev.1CE-Certified by SAS-TEC full back protector, designed to protect and to stay put on your back in highspeed action. The daypack is equipped with our bounce free No Dancing Monkey 2.0 + Snug-Me waist support belt that makes the pack totally bounce free on your back without cramping your style. - Zero bounce with NDM2.0 + Snug Me – The No Dancing Monkey 2.0 harness developed and tested with top athletes to give you the perfect fit with no compromises, with absolutely no bounce. - NDM Buckle-Technical buckle for a more secure closure and a better fit . - Stay protected – Worry less about falling over and more about how to gain speed with the removable Lev.1CE-Certified by SAS-TEC full back protector, designed to protect and to stay put on your back in highspeed action. ZERO BOUNCE ON THE TRAIL MOUNTAINBIKE CRUSADES With its ventilated and multi-size adjustable back panel, it’s very easy to match for an individual fit and performance. Top that with the NDM 2.0 + Snug Me harness you’re going to get the best fitting sports backpack with absolutely zero bounce. Sure, we are bragging, but it’s true! Geared up with several smart storage compartments, a helmet carry system, armor attachment points, and a removable Lev.1CE-Certified by SAS-TEC full back protector that makes this pack perfect for your freeride or enduro bike adventure. CARRY YOUR GEAR The FLOW 25 MTB backpack has a total storage of 25L for all your essential gear and tools. The front straps have modular solutions if you want to clip on front pockets for your phone or other quick access stuff like gel or energy bars. It has a helmet carry system, some armor carry attachment points, included rain cover and a zippered top panel pocket with soft inner fabric to store your goggles or personal gadgets. We even threw in a microfiber cleaner tissue, we thought of everything! You got a big main zippered organizer pocket with a large and smooth opening and with the outside compressions system you can wrap it all up tightly for a slim balance that doesn’t interfere with your balance or style. STAY HYDRATED Fit up to a 3L/100oz hydration bladder (not included) with the drink tube secured on the shoulder straps.

SHRED is the high-end performance daypack with an outstanding comfort fit that you bring to your favorite freeride MTB adventures. The pack is equipped with our bounce free No Dancing Monkey 2.0 + Snug-Me harness system and waist support belt that makes it a super smooth biking backpack that will stay put without cramping your style, even when going downhill or on crazy terrain. - Zero bounce with No Dancing Monkey 2.0 + Snug Me-Harness developed and tested with top athletes to give you the perfect fit with no compromises, with absolutely no bounce. - 25L storage to fit all your gear and tools. - NDM Buckle-Technical buckle for a more secure closure and a better fit ZERO BOUNCE ON THE FREERIDE MOUNTAINBIKE TRAILS With its ventilated and multi-size adjustable back panel, it’s very easy to match for an individual fit and performance. Top that with the No Dancing Monkey™ 2.0 + Snug Me harness you’re going to get the best fitting bike backpack with absolutely zero bounce. Sure, we are bragging, but it’s true! Geared up with several smart storage compartments, a helmet carry system and armor attachment points, makes this MTB backpack perfect for your trail or enduro MTB adventure. PACK YOUR GEAR The SHRED 25 has a total storage of 25L for all your essential gear and tools. The front straps have modular solutions if you want to clip on front pockets for your phone or other quick access stuff like gel or energy bars. It has a helmet carry system, some armor carry attachment points, included rain cover and a zippered top panel pocket with soft inner fabric to store your goggles. We even threw in a microfiber cleaner tissue… we thought of everything! Fit up to a 3L/100oz hydration bladder (not included) with the drink tube secured on the shoulder straps. You got a big main zippered organizer pocket with a large and smooth opening and with the outside compressions system you can wrap it all up tightly for a slim balance that doesn’t interfere with your balance or style, important on a mountain bike backpack.

The Quick Cage 3-bolt Adapter is made from high-impact nylon with stainless steel inserts and is designed to hold any 2 or 3-bolt cage, such as the Anything Cages by King Cage, Salsa, and Blackburn. Stuff sacks, sleeping rolls, tents, as well as extra-large water bottles are all game.

Our vinyl-coated cage is specifically designed for holding the taller stainless steel bottles, without scratching or rattling. Its straight-back design allows the bottle to rest comfortably and securely in the cage. - Stainless steel cage with a black vinyl coating - Fits any size frame tube or seatpost with a Velcro strap - Will not scratch metal bottles or remove paint - TF-41 is capable of holding bottles up to 24oz - TF-42 is capable of holding standard Nalgene bottles - Made in the USA

Our vinyl-coated cage is specifically designed for holding the taller stainless steel bottles, without scratching or rattling. Its straight-back design allows the bottle to rest comfortably and securely in the cage. - Stainless steel cage with a black vinyl coating - Fits any size frame tube or seatpost with a Velcro strap - Will not scratch metal bottles or remove paint - TF-41 is capable of holding bottles up to 24oz - TF-42 is capable of holding standard Nalgene bottles - Made in the USA

- Stainless steel cage with 24 ounce screw top bottle - Cage Velcros on any size frame tube or seat post

This stainless steel, insulated iteration of the well-loved Podium bottle keeps your hydration cold without holding you back. Keep your chill Tough enough to tackle any ride, the Podium® Steel is built for life on and off the road. Made from premium 18/8 stainless steel, this sleek bottle combines rugged durability with a streamlined design that's always close at hand but stays out of your way. The double-wall vacuum insulation keeps your beverages cold for your entire ride, and the lightweight construction strikes the perfect balance between agility and reliability. Product details: - Made with safer chemicals, designed to preserve resources and diminish disposables - Double-Wall Vacuum Insulation - Temperature defying chill - Lightweight Design - So lightweight you might forget it's there - Hours Cold - 18 hours - No Squeeze Required - Just grab, lift, and sip - 18/8 Stainless Steel - Tough as nails, but doesn't taste like them - High-Flow Cap - Logic-defying sipping ease - Leakproof Lockout - No spills, all thrills Features: Easy Drinking Stay focused on crushing your ride – not your bottle. Podium's high-flow cap means there's no squeezing necessary to get maximum hydration. Just grab, lift, and sip! Tired of plastic? Ditch your plastic water bottles for the CamelBak stainless steel and titanium bottles that are built to stand the test of time. Stainless steel vs. titanium Both bottles will be long-lasting and easy to clean, so which do you choose? Easy! The titanium bottles are lighter weight and the stainless steel bottles offer more durability while keeping your water colder for longer.

This stainless steel, insulated iteration of the well-loved Podium bottle keeps your hydration cold without holding you back. Keep your chill When you're charging uphill, you need hydration that's close at hand but stays out of your way. The Podium® Steel 22oz is made from premium 18/8 stainless steel with a sleek design and expanded capacity so you can carry more water without ever slowing down. The double-wall vacuum insulation keeps your beverages cold for your entire ride, and the lightweight construction strikes the perfect balance between agility and reliability. Product details: - Made with safer chemicals, designed to preserve resources and diminish disposables - Double-Wall Vacuum Insulation - Temperature defying chill - Lightweight Design - So lightweight you might forget it's there - Hours Cold - 18 hours - No Squeeze Required - Just grab, lift, and sip - 18/8 Stainless Steel - Tough as nails, but doesn't taste like them - High-Flow Cap - Logic-defying sipping ease - Leakproof Lockout - No spills, all thrills Features: Easy Drinking Stay focused on crushing your ride – not your bottle. Podium's high-flow cap means there's no squeezing necessary to get maximum hydration. Just grab, lift, and sip! Tired of plastic? Ditch your plastic water bottles for the CamelBak stainless steel and titanium bottles that are built to stand the test of time. Stainless steel vs. titanium Both bottles will be long-lasting and easy to clean, so which do you choose? Easy! The titanium bottles are lighter weight and the stainless steel bottles offer more durability while keeping your water colder for longer.

Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.

Topeak's Modula EX is a sleek, adjustable bottle cage that securely carries a wide range of bottles.

Topeak's Modula II is a sleek bottle cage capable of handling bicycle water bottles and small mineral water or sports drink bottles. So go ahead and buy that sports drink! Now it will fit in your bottle cage.

Topeak's Modula Java Cage carries your 12 or 16 ounce coffee cup with ease, so you can bring your favorite hot beverage along for the ride. It grabs securely with a rubber strap and adjusts to fit most insulated mugs.

Made from Toray Japan T700 and T300 carbon fiber using a unique carbon flat lay-up process, the Shuttle Cage XE is an incredibly strong, ultralight, and affordable 3K carbon fiber bottle cage. With two stainless steel bolts included, it's ready to mount and enjoy on your ride. - Fits standard water bottle - Two stainless steel bolts included - Material: Torayca Japan T700 and T300 advanced carbon fiber - Size: 14 x 8.6 x 7.4cm / 5.5" x 3.4" x 2.9" - Weight: 22g / 0.78oz

Tri-BackUp series is a complete system that Topeak has carefully integrated storage, hydration and repair into one solution for triathletes. The Tri-BackUp Air Station is an adapter for mounting a CO2 inflator, CO2 cartridges, and a mini pump. - Material: Engineering grade plastic - Compatibility: HybridRocket RX, RaceRocket HP Carbon, RaceRocket HP, Micro AirBooster, - Two 16g CO2 cartridge - Mount: Works w/ TRI-BackUP Elite / Pro V / Pro I - Size: 10.3 x 8.6 x 3.3 cm / 4.1” x 3.4” x 1.3” - Weight: 30 grams / 1.06 oz *Mini pump, CO2 inflator, CO2 cartridges & Tri-Cage not included

Saving time wherever possible is important to a triathlete and the Tri-Backup Pro V aids by mounting to the “V” section of your saddle to form a rear saddle hook helping to minimize T1 and T2 times. This sturdy rack also provides multi-combo capabilities to customize equipment for any race needs. - Material: Pressed aluminum - Mount: V rail section of saddle Compatible with CrMo, Ti, & Carbon rails - Hydration Capacity: One or two bottles (up to 750cc each) - Max Load: 2.5 kg / 5.5 lb - Compatibility: Tri-BackUp Air Station, Tri-BackUp TubeBag, Tri-BackUp TireBag, Ninja TC Road, Ninja Pouch+ Road. Ninja CO2+ Tri-Cage - Added Feature: 2 angle positions - Size: 11.8 x 8 x 6.9 cm / 4.6” x 3.1” x 2.7” - Weight: 97 grams

Versatile mount for additional water bottle cage or other accessories. Band style clamp provides easy installation and flexible mounting options. - Fits tubes 20 - 60mm - Engineering grade polymer - Max load: 1.5 kg / 3.31 lb - 26 g / 0.92 oz (2 pcs)

Add a touch of Teravail to your ride with these bottles. - BPA-free plastic - 100% FDA food-grade materials - Non-solvent base (UV cured) CPSC-approved ink - Volume: 22 oz

- Copper finish matches premium leather saddles and MKS pedals - 4.5Mm aluminum rod with aluminum bolts - Made in japan

The Tanaka R.A.M is a threaded accessory boss that you can mount to your suspension fork and most tubes on your bikes, - Simple but extremely effective accessory mount - Repositionable, mounts almost anywhere on the bike - Includes a small piece of Newbaum's cotton tape to protect the frame or fork finish - Two sizes: 28.6-35mm or 42-50mm - Sold individually, two are needed to mount a bottle cage

The Tanaka R.A.M is a threaded accessory boss that you can mount to your suspension fork and most tubes on your bikes, - Simple but extremely effective accessory mount - Repositionable, mounts almost anywhere on the bike - Includes a small piece of Newbaum's cotton tape to protect the frame or fork finish - Two sizes: 28.6-35mm or 42-50mm - Sold individually, two are needed to mount a bottle cage

Stainless steel bottle cage made with extra stiff 6mm OD tubing. - Weight: 77g - Semi-polish finish - Made in Japan

Stainless steel bottle cage made with extra stiff 6mm OD tubing. - Three sets of holes for multi-position mounting - Weight: 83g - Semi-polish finish - Made in Japan

Lightweight tubular stainless steel bottle cage. Stainless steel won't mark plastic bottles like aluminum cages do. - Bolts are not included. - Made in Japan. (The raw version may have imperfections and discoloration from weld heat)

Made with a mix of materials - a carbon shell and glass fiber core - the Ciro bottle cage is optimized to be as light as possible. It's shaped to clamp the bottle very tightly, and has been given a minimalistic design so it does not upstage your bicycle.

The Deva has proven its worth during the cycling classics over cobblestones. Its material and unique cylindrical shape ensure perfect clamping and prevent the bottle slowly working its way up. The cage is designed so that the bottle can be inserted easily and smoothly. And since it's produced in so many different colors, there is one available for everyone's bike.

This 22oz water bottle is straight from the Department of Stoke here at Swift Industries. Specifications: - Capacity: 22 oz. - Brand: Purist Water Bottles Materials: - BPA-Free plastic - Silicon dioxide infused to prevent odors, stains and mold

The Surly Born to Lose Water Bottle offers premium real estate for your refreshment of choice. Shielded from unwanted odors, flavors, mold, and stains, your water won’t taste like whatever else you put in there last time. Available in 22 oz. and 26 oz. sizes

Hey mang! I'm Flasky! You know, where ever I go people are always saying to me “Flasky, you're a good friend. You keep me warm when I'm cold, loose when I'm tight, and twirling when I should be sleeping.” Hey, I try! But I want people to know how tough I am! Not even a dog can hurt me! Well maybe a dog could, I don't know, like if it was maybe a pit-bull or something. Especially an alcoholic pit-bull who hadn't had a drink in a while. But still, I'm pretty tough cuz I'm stainless steel. I don't rust and I don't trap flavors like plastic. That way your gin don't taste like your juice. I'm a good size too; more than enough but never too much, except sometimes. So yeah, that's me. Let's go for a ride. Right now. C'mon, don't be stuck up. - Stainless steel. 6 oz (177ml)

The Surly Monster Squad Water Bottle offers 22 oz. of premium real estate for your refreshment of choice. Shielded from unwanted odors, flavors, mold, and stains, your water won’t taste like whatever else you put in there last time.

An absolute masterpiece, this cage screams style. The Fly Cage Ano’s clean lines and laser etched design really stand out. No cage outperforms the Fly Cage Ano with its LockTight wing design, that holds bottles securely while keeping them accessible. - 100% anodized aluminum - LockTight Wings - Laser etched design - Road and MTB approved - High-end and durable

An absolute masterpiece, this cage screams style. The Fly Cage Carbon’s clean lines and hand-painted edges really stand out. No cage outperforms the Fly Cage Carbon with LockTight wings, which hold bottles securely while keeping them accessible. - 100% 3k Carbon - LockTight Wings - Hand-painted - Road and MTB approved - High-end and durable

An absolute masterpiece, this cage screams style. The Fly Cage’s clean lines and clean laser logo really stand out. No cage outperforms the Fly Cage Poly—its LockTight Wings design grip your bottle securely while still keeping it easily accessible. - 100% Polycarbonate - LockTight Wings design - Laser-etched logo - Road and MTB approved - High-end and durable

A true side entry design with style for days. Perfect for full suspension bikes and any small road/MTB rig. A uniquely shaped LockTight Wing resists forces from big hits and rough roads, keeping your bottle ultra secure while allowing direct access from the side. - 100% Tough Polycarbonate - 12mm Installation Adjustability - Embossed Pattern - Road/MTB/Gravel Approved - High-End & Durable - Available For Right & Left Sides

- Handlebar cage mounting bracket allows any bottle cage to be firmly attached to handlebars - Compatible with handlebars from 22mm to 36mm

- Universal alloy water bottle cage - Hardware included - Size: 6mm

Sunlite's Alloy Cage comes in a rainbow of colors to match your bike. It's light, holds fast and looks great.

• Fits bars: 22.2 to 31.8mm diameter • No-Tool quick-release mount • Anodized finish

- Insulated, handlebar-mounted cup holder for cans of your favorite beverage - Perfect for cruisers, commuters and neighborhood explorers - Fits 22.2mm bars

• Composite construction • Fits standard bottles

- Composite side-load water-bottle cage - Intelligent design allows the cage to be used as a left- or right-hand release by simply switching the mounting tab - Perfect for full suspension or frames with tight clearances

• Biodegradable bottle and cap • Easy to squeeze soft plastic, soft plunger • BPA free, California prop 65 compliant • Made in the U.S.A.

The Clear Taste Water bottle doesn't add its flavor to water as traditional bike bottles do. - Doesn't leach bisphenol-A(BPA) like polycarbonate bottles - Does not add yucky plastic flavor like many other bicycle water bottles - Squeezable PETE plastic - 24 oz. capacity - Fits in most bottle cages - Big Flow spout - Translucent so you can easily see how much liquid you have left - Colors: Clear, translucent blue, and translucent smoke grey

The SKS Anywhere Adapter with VeloCage Bottle Cage allows you to mount a bottle cage anywhere on your frame. Remove the bottle cage, and almost anything can be placed anywhere on your bike frame. Perfect for bikes that do not have water bottle cage mounts. The double-sided hook-and-loop straps are super strong and long enough to go around almost any frame tubing—cut straps to desired length after placement. Designed to mount water bottle cages, mini pump mounts, and other standard items, the straps can also be used to strap on jackets, bananas, energy bars, trail tools, fishing poles, and more. Cage is included in case that is your main purpose for the adapter.

- Pair of Velcro attached bosses - Mount a water bottle cage or pump mount on any part of your frame

The Bottle Cage Adapter lets you fasten a bottle cage to any round tube on your bike. Angle adjustment ensures your bottle is always properly positioned.

- .75L SKS water bottle - Made in Netherlands

- .5L SKS water bottle - Made in Netherlands