The Third Eye Foam Helmet Mirror allows you to see what's coming behind you so you can ride defensively and stay safe on the road. The shatter-proof glass mirror is distortion-free and highly durable. It attaches to the inner or outer rim of almost any helmet with a high-tech product called Dual-Lock.

- The original third-Eye bar-End mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to most handlebar bar-End with a rubber, Internal-Expanding plug system

Sunlite's HD I Mirror offers a nice, wide and clear view of what's behind so that you can ride more safely. It quickly and easily attaches to virtually any handlebar configuration. It's light and fully adjustable.

Mirrycle's Incredibell Adjustabell 2 uses a fully adjustable handlebar clamp that fits any size bars. Its perfect size and pivoting ringer let you mount it just about anywhere on your handlebars, and allows you to ring it with your thumb or finger. The Adjustabell 2 can even be mounted to a ski pole or walking stick. One flick and it rings loud and clear for all to hear. - Weight: 26g (.9oz) - Dome Diameter: 34mm (1.34") - Fits handlebars with 15mm – 39mm (.59"- 1.54") outside diameters

The Mirrycle Jellibell is a fun way to let pedestrians and other riders know you're coming! The Jellibell has a see-through top so you can see the gears spin as it rings. It's weatherproof, too! - Dome Diameter: 48mm (1.9") - Fits handlebars with 21mm – 22.5mm (.83" – .89") outside diameters

Mirrycle's Incredibell Road Bell is little, light and convenient. Its small size and pivoting ringer let you mount it on either right or left Shimano STI shifter/brake lever. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Dome Diameter: 28mm. Domes are solid brass – black or chrome plated - Will fit either left or right lever - Weight: 26g

The Mirrycle mounts in minutes with the wrench that is included. The mirror is a 3" round, convex glass mirror with a wide field of view. The mirror is adjustable to any viewing angle. - Fits inside handlebars with 13.75mm – 22.5mm (.54" to .875") inside diameter

Don't let the small size fool you. The Original Incredibell is little, light and LOUD! Its diminutive dimensions and pivoting ringer let you mount it just about anywhere on your handlebars. A flick of your finger and the Ding! Ding! rings clear for all to hear. - Dome Diameter: 33mm (1.3") - Fits handlebars with 21.7mm – 26mm (.86" – 1.02") outside diameters

The Mirrycle Road Mirror was developed exclusively to fit Shimano STI shifter/brake levers without interfering in any way. The Road Mirror fits almost all the different shift/brake combos. It goes on quickly and easily with the included tools. Just a flick of your eyes allows for a quick view behind. And, it can be attached to either the left or right side lever. Let's be careful out there.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Large Oi fits 23.8 to 31.8mm bars e.g. drop bar road bikes and some cruiser / commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognizable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organizer inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

Bike bells generally look & sound a bit ugly. But why? What if they looked sexy & sounded like an angel playing a glockenspiel? A bell with a beautiful tone, but also a remarkable style and choice of materials that embodies a rider’s personality. The Small Oi fits 22.2mm diameter bars, e.g Mountain bike (near the grips), BMX & some old commuters. Please make sure you know where on your handlebar you are going to place the bell (grips or stem) before you order as you may need a different sized bell. THE LOOK Where bells usually protrude up or out, Oi doesn’t. It appears to hover around the handle bars. In one sense, it's discreet. But in another, it stands out as unrecognisable. THE SOUND Knog tested numerous prototypes to get the perfect pitch, length of ring, and volume. With a spring-loaded actuator built into the mount, the strike of the bell is firm and fast, allowing a good balance of volume and longevity of sound. It actually has several pitch tones - one core and several supportive higher tones to ensure it's unmistakable and safely heard. To compare it to a musical instrument, where some bells play a single note, Oi plays a chord. THE MOUNT What about the handle-bar cables? No worries. Built into the shape of the mount is a cable management system. So not only does it allow the bell to look and sound uninterrupted, it also helps gather your cables (for the organiser inside us all). What about getting it on the bar. Again, not a thing. Just pop it over, give the hex screw a quick tighten up, and you're good to go. No sliding down the handlebars, no dismantling and re-assembling.

A new angle on bells. Low and lean looking; very techy too. - Fits handlebars with 22.7mm – 26mm (.0.89" – 1.02") outside diameters

A bicycle bell with a quality sound is how you say hello in Electra. - Easy to push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

A bicycle bell with a quality sound is how you say hello in Electra. - Easy to push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

The necessary final touch on your favorite bicycle, Electra's Ding Dong Bell is the perfect form-meets-function accessory. This classy bell has a pleasant ding-dong sound and simply clamps onto your handlebars for easy installation. Pick the one that expresses you! - Oversized bell with cheerful "ding-dong" doorbell style ring - Fits standard bicycle handlebar - Includes attachment hardware

The best thing to happen to handlebars since grips. - Easy to push lever creates friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

A bicycle bell with a quality sound is how you say hello in Electra. - Easy to push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

A bicycle bell with a quality sound is how you say hello in Electra. - Easy to push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

A bicycle bell with a quality sound is how you say hello in Electra. - Easy to push lever creates a friendly ringing sound - Fits standard bicycle handlebar - Includes attachment hardware

A bicycle bell with a quality sound is how you say hello in Electra. - Oversized bell with cheerful ding-dong doorbell style ring - Fits standard bicycle handlebar - Includes attachment hardware

- The ultimate flat handlebar mirror - Versatile and durable with a wide angle of adjustment that can be flipped down and out of the way - Installs in seconds, comes fully assembled

- Made in the USA - Wide field of view with three pivot points for total adjustability - Lightweight and optically correct - Fits helmet visors and eyeglasses; will fit helmets with adapter

Topeak's Bar'n Mirror is a great addition to any touring or commuting bike. This clever combination places a streamlined, fully adjustable mirror into a cold-forged aluminum bar-end body. The result is additional, comfortable hand positions and the supernatural ability to know when traffic is approaching from behind.

- The original third-Eye eyeglass mirror design - Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts to left or right sun/Eyeglass temple-Arm - Rubber-Tipped outer prongs provide a no-Slip mount

The Third Eye Hardshell Helmet Mirror clips on to all hardshell helmets and many helmet visors. Its distortion-free, shatterproof glass mirror allows you to see what's coming from behind so you can ride defensively and safely.

- Shatter-Proof aluminized glass mirror, Resists discoloration - Mounts on either side of helmet offering a wide range of adjustment - Mirror and/Or arm can be detached from helmet mount - Adhesive backed plastic fan-Plate fits most helmets

- Alloy lever action safety bells perfect for kids bikes - Sturdy alloy construction with an adorable insect or animal on top

Let everyone know your coming with Sunlite's Big Ben Jr. Bell. A simple spin makes the classic "ring-ring" sound that everyone loves. It fits most bars and can be used right or left handed.

•Classic Bugle design •Clamp fits most handlebars

Let everyone know your coming with Sunlite's Candy Mini Bell. It comes in a variety of colors to match your bike and gives you a resounding "ping." It fits most bars and can be used right or left handed.