Wheels

- Anodized aluminum - 50 nipples per bag - 12mm length

- Cold forged 304 stainless steel with rolled threads - Lightweight 2.0mm/1.7mm/2.0mm double-butted form - Nipples sold separately - 172g (32 spokes @ 262mm) - Bag of 50

- Cold forged 2.0mm 304 stainless steel with rolled threads - Nipples sold separately - 213g (32 spokes @ 262mm) - Bag of 50

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs with 126mm spacing - Type: Hollow Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 137mm - 1 axle per bag

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs with 130mm spacing - Type: Hollow Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 141mm - 1 axle per bag

Wheels Mfg axles are made from aircraft quality 4130 alloy steel, made specifically for Wheels Mfg. It’s heat-treated to increase strength without making the axle brittle. Rolled threads make for easy assembly of cones & locknuts. - Fits many Taiwanese hubs with 135mm spacing - Type: Hollow Axle - Threads: 9.5mm x 26tpi - Diameter: 9.5mm - Length: 146mm - 1 axle per bag

Machined aluminum spacers for freehubs. Great for fine tuning freewheel and cassette placement or improving chainline. Also good for bottom bracket spacing with BSA BB cups. - Inner Diameter: 35.0mm - Outer Diameter: 40.7mm - Material: Aluminum - Finish: Polished - Bags of 10

Wheels Manufacturing Outer Axle Nuts are high-grade steel nuts that provide secure wheel fixing for solid-axle wheels. - 14mm x 1mm (1411-AN) sold in pairs - All others sold individually

WHEEL PAIR, 27.5 584x22 RYDE EDGE, Internal width 22mm, offset spoke bed, BLACK DISC rim, 32hole ORGIN8 HUBS MT3100 MT3110, 6 BOLT ROTOR, 15mm FRONT SEALED, 12mm REAR SEALED BLACK 142mm XD CASSETTE, DT SPOKES BLACK Brand Name: WHEEL MASTER

WHEEL PAIR, 27.5 584x25, RYDE RIMS TRACE-25MM TUBELESS BLACK DISC 32 OFFSET SPOKES, ORGIN8 HUBS MT3100 MT3110, FRONT 100 15 AXLE, REAR 12mm XD FREEHUB 6 BOLT DISC SEAL BEARING BLACK 142mm, DT SPOKES BLACK

The Hubs are 100mm front 15mm and rear is 142, 12mm axle. -WHEEL PAIR 29 622x26, RYDE EDGE 26MM OFFSET TUBELESS BLACK (SANDBLAST), -DISC 28HOLE, -ORIGIN 8 HUBS MT3100 MT3110 8-10 SPEED CASSETTE 6 BOLT DISC, -FRONT 100MM Non BOOST 15mm, -REAR HUB 12mm SEALED BEARING BLACK NON-BOOST 142mm, DT SPOKES 2.0 BLACK

Asym rims use an asymmetrical design to create a rim that evenly distributes tension, doesn’t require dishing, and makes for a faster wheel assembly. High end WT69 Alloy and an open cavity design keep Asym weights down while eyelets prolong longevity and prevent binding. Featuring a full TCS (tubeless compatible system) inner rim profile, Asym rims provide a lightweight, higher performance value-driven option that works exceptionally well with wheel building machines.

- Shell: 8mm flanged axle nut - Flanged

- Replacement steel quick release skewers

- Replacement rear skewer - Spacing: 135mm - Material: Steel

- Converts Schrader rims to Presta - Rubber - Sold individually

Product specs: - Str tubeless ready - Size: 27.5", 29" - Outside width: 40mm - Inner bead width: 36mm - Weight: 27.5"-515g, 29"-550g - Double wall welded rim (sleeved rims available oem only) - Brake compatibility: disc only - Hole count: 28/32

Replacement wheels for Strider Sports balance bikes - EVA-Polymer, no-flat, maintenance-free tire - Fits all 12" Strider models - Cartridge bearings - Wheel Size: 12-inch - Sold individually

Stan's lightweight aluminum valve stems are half the weight of Stan's standard brass valves. The secure round base is compatible with most tubeless rims and a perfect fit for all Stan's BST rims. A removable valve core makes adding sealant easy, and these babies fit up to 8mm valve hole. Sold as a pair.

Replacement bearings for Stan's NoTubes Neo hubs. Includes 2 bearings. - 26mm OD x 15mm ID - 7mm thick

Replacement rear axle for Neo and Neo Ultimate hubs. High-precision center-less ground treatment ensures perfect bearing fit.

Can be used with Stan's ZTR rims to make them airtight or used as a lightweight rim tape in any rim. A single 10-yard roll will tape five 26-inch rims or four 29-inch rims or two wide road clincher rims. 21mm width fits: - ZTR Olympic - ZTR Iron Cross - ZTR 355 - ZTR Alpine - ZTR Crest - ZTR Alpha 340 (2 layers) - ZTR Alpha 400 (2 layers) - Most road clincher rims 25mm width fits: - ZTR 355 (26", 650b, 29") - ZTR Crest - Crest MK3 - ZTR Arch EX - ZTR Flow EX - Crest S1 27mm width fits: - ZTR Flow EX - ZTR Bravo - ZTR Hugo 52mm - Arch S1 - ZTR Rapid 28 - ZTR Rapid 30 - Arch MK3 30mm width fits: - ZTR Flow MK3

Use Stan's Tubeless Valve Stems when you're converting standard rims to tubeless via the taping method. These also have a removable core for easier application of tire sealant. Note: Schrader valve is for non-stepped Hugo rims. If your Hugo rim decal reads: - MAX RIM PRESSURE: 2.8 tires: 26psi, 3.0 tires: 24psi - ERD 615, 622x49.9, 29 in x 52.3mm Your rim has a stepped valve and is not compatible with this Schrader valve.

Salsa springs for Flip-Off skewers

Origin-8's Track Cog Lock Ring with left-handed threading and 1.29 x 24tpi in a chrome finish completes your basic track cog locking needs.

- High-quality fat bike rim strips - Super durable PVC material

Protect your tubes without adding bulk with these Rim Strips from FSA. They're lightweight, and come in different lengths according to wheel size. Peace-of-mind comes standard.

The crowning touch to any cruiser wheel. - Decorative valve covers screw on to valve stem - Designed for standard Schrader valves only - Set of two, one for each wheel

- Standard American Schrader Valve - CNC Machined from 6061 T6 aluminum - Knurled body for added grip - Sold as a pair - Upgrade your plastic caps with some style - Compatible with all Schrader valve tubes, including cars, motorcycles, wheelbarrows, tractors, and more - Weight: So light they will not register on our scale

- CNC Machined from 6061 T6 aluminum - Knurled body for added grip - Sold as a pair - Upgrade your plastic caps with some style - Weight: So light they will not register on our scale